pump to rack hose

[Ed Kellock]

I recently wrangled with the similar bolt on a V8q.  I ended up using a
straw with a string pushed through it, wrapped around the bolt just under
the head and was able to get the bolt started in the threads after several
attempts to learn some new dexterity.

Ed

-----Original Message-----
From: 200q20v-bounces at audifans.com [mailto:200q20v-bounces at audifans.com] On
Behalf Of feelstranger
Sent: Friday, September 25, 2009 8:33 AM
To: 200q20v at audifans.com
Subject: Re: pump to rack hose


Wow, no joke.  Spent a good long time last night attempting to get the banjo

bolt back in...
Had to leave it alone for another try today.
What a PITA.
Maybe my wife's small hands?
BTW, taking it off was easy with a "gear wrench"

--------------------------------------------------
From: "Tony Hoffman" <auditony at gmail.com>
Sent: Monday, September 21, 2009 2:28 PM
To: "Austin Calise" <yoda_audi at yahoo.com>
Cc: <200q20v at audifans.com>
Subject: Re: pump to rack hose

> And, bolting it back on is even worse! That's why I use Spokane house 
> of hose. They put swivel fittings on the ends, and you can just put 
> the end on the rack first, then the rest of the hose on that. BTDT 
> both ways, it's about ten times easier with the swivels. And, they are 
> not very expensive at all.
>
> Tony
>
> On Sun, Sep 20, 2009 at 8:31 PM, Austin Calise <yoda_audi at yahoo.com>
> wrote:
>> Nat, cheapest place would be germanautoparts.com be well aware that
>> unbolting said hose from the rack is a nightmare.
>>
>> HTH's Austin
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
> 
_______________________________________________
200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v