oil pressure at idle

[robert weinberg]

i was wondering that. i'm using a bosch filter from kragen. should i swap in a mann or a mahl?

or is 1.5 bar acceptable?

Robby



________________________________
From: Bryan Bassett - NDS <bryan at northwestdata.com>
To: robert weinberg <centaurus3200 at yahoo.com>
Sent: Thu, March 18, 2010 10:47:26 AM
Subject: Re: oil pressure at idle


Oil filters can cause that...
I only use Mann filters - after seeing exactly what you're describing with a Fram.
And yes, the oil weight could also be the issue - these motors are extremely sensitive to this.
Good luck!
Cheers,
Bryan


On Thu, Mar 18, 2010 at 11:42 AM, robert weinberg <centaurus3200 at yahoo.com> wrote:

hi all,
>
>historically my oil pressure is about 2 bar at idle - hits 5 bar pretty quick once you build rpms.
>
>driving home yesterday from work - i noticed that by the time was was nearly home - at a stoplight, the pressure was about 1.5 bar. i usually put 20/50 in the car - but i'm sure the mechanic put 10/40 in it, despite my request for 20/50. car doesn't burn oil - such as it's MAYBE 1/2 quart low after 3k miles. the oil was changed only a few hundred miles ago. i checked it after it was changed - it was full. no leaks under the car or anything.
>
>is 1.5 bar at idle a problem?
>
>Robby
>
>
>
>
>_______________________________________________
>200q20v mailing list     http://www.audifans.com/mailman/listinfo/200q20v
>


-- 
Bryan Bassett
NorthWest Data Services, LLC
bryan at northwestdata.com
719 276-2591
970 846-1032
This e-mail and any attachments may contain confidential and privileged information.  If you are not the intended recipient, please notify the sender immediately by return e-mail, delete this e-mail and destroy any copies.  Any dissemination or use of this information by a person other than the intended recipient is unauthorized and may be illegal.