1991 TQ 200 20v with 26k miles

[Ed Kellock]

Also, without the engine running there's at least one code that comes up
because it can't get a signal from the timing pin on the flywheel.  Or
something like that.

Ed
 


-----Original Message-----
From: 200q20v-bounces at audifans.com [mailto:200q20v-bounces at audifans.com] On
Behalf Of Kent McLean
Sent: Saturday, October 30, 2010 1:12 PM
To: 200q20v at audifans.com
Subject: Re: 1991 TQ 200 20v with 26k miles


Jim Hollander wrote:

> The first code using the blinking improvised test
> light method is 4414,  I believe I recorded a code 4411, 2111, 2411, 
> and 4412.  Can there be that many codes that come up on a no-start 
> condition? Can someone tell me what the codes indicate with my 
> no-start condition?  Is there a table of Audi codes posted somewhere?

The codes are here:
<http://www.sjmautotechnik.com/trouble_shooting/20vcodes.htm>

You may find that one problem will trigger the first code, and others
cascade off that. Fix the first problem and the rest go away.

-- 
Kent McLean
1999 A4 Avant, V6 Tiptronic
1990 200 Avant mit V8 conversion
gone: 1990 V8 w/5-speed and other mods
gone: 1991 200 TQA #3, with mods
gone: '91 200 TQA x2, '94 100 S Avant, '89 200 TQ "Bad Puppy"

_______________________________________________
200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v