PS high pressure hose

[Robert Bade]

I've saved this for some time, waiting for the day I needed it, that day has come. 


 am a bit puzzled though Bernie. You say "one each 19000-5-6S", is 19000-5-6S one part, or is it 19000-5S and 19000-6S? You do say one -6S 

I am a bit puzzled though Bernie. You say "one each 19000-5-6S", is 19000-5-6S one part, or is it 19000-5S and 19000-6S? You do say one -6S 
so that leads me to believe they are separate. Next, I need one each of the first part and one of the second, that adds up to 3, wouldn't I need 4 total parts, 2 for terminating the hose and 2 to mate with the OE steel fittings? I've looked online at Aeroquip and that really just confused me more. I appreciate you taking the time to write these directions and I hope you can help me see what I'm missing! 

Thanks, Bob





>>>> The cheaper alternative is to buy Aeroquip reuseable hose end  >>>> fittings and>>>> the correct length of hose to fit and make your own, using the  >>>> Audi hose end>>>> tubing from the old hose.  The specific hose end style is called>>>> "Lifesaver", AE part 190000-size, and it has a weld socket into  >>>> which the>>>> Audi hose end tube is silver soldered, brazed or welded.  The  >>>> Audi hose end>>>> is cut off just above the hose crimp and the full metal tubing  >>>> ends are thus>>>> attached to the reuseable fittings and then the hose is attached  >>>> to the>>>> fittings.  BTDT on my 200-20V using one each #190000-5-6S and  >>>> one -6S (the>>>> Audi tubing was a different size on each end) and 25" of AE  >>>> FC300-06RL hose.>>>> Total cost $23.30