PS high pressure hose

[Bernie Benz]

Hi Bob,

I recently upgraded my Mac OSX from 10.4 to 10.6 and in doing so have (temporarily I hope) lost my old archived emails. But you’ve given me enough of my original posting that I can figure it out and clarify for you.

>>>>> The specific hose end style is called "Lifesaver", AE part 190000-“size“, and it has a weld socket into which the Audi hose end tube is silver soldered, brazed or welded.

So the subscript numbers define the steel tubing “size”.

>>>>> BTDT on my 200-20V using one each #190000-5-6S and one #19000-6S (the Audi tubing was a different size on each end) and 25" of AE FC300-06RL hose.
You need two new but different fittings only, new hose, and your old steel tubing hose ends.

Regards, Bernie
Gardnerville, NV
'90 90Q-20V175K grandson’s now
'91 200Q-20V 238K
‘02 A6 2.7TQ 6spdMT 155K
'88 Ford QuatroTractor
Other Misc. Toys





On Jul 13, 2012, at 2:49 PM, Robert Bade wrote:

> 
> 
> I've saved this for some time, waiting for the day I needed it, that day has come. 
> 
> 
> am a bit puzzled though Bernie. You say "one each 19000-5-6S", is 19000-5-6S one part, or is it 19000-5S and 19000-6S? You do say one -6S 
> 
> I am a bit puzzled though Bernie. You say "one each 19000-5-6S", is 19000-5-6S one part, or is it 19000-5S and 19000-6S? You do say one -6S 
> so that leads me to believe they are separate. Next, I need one each of the first part and one of the second, that adds up to 3, wouldn't I need 4 total parts, 2 for terminating the hose and 2 to mate with the OE steel fittings? I've looked online at Aeroquip and that really just confused me more. I appreciate you taking the time to write these directions and I hope you can help me see what I'm missing! 
> 
> Thanks, Bob
> 
> 
> 
> 
> 
>>>>> The cheaper alternative is to buy Aeroquip reuseable hose end  >>>> fittings and>>>> the correct length of hose to fit and make your own, using the  >>>> Audi hose end>>>> tubing from the old hose.  The specific hose end style is called>>>> "Lifesaver", AE part 190000-size, and it has a weld socket into  >>>> which the>>>> Audi hose end tube is silver soldered, brazed or welded.  The  >>>> Audi hose end>>>> is cut off just above the hose crimp and the full metal tubing  >>>> ends are thus>>>> attached to the reuseable fittings and then the hose is attached  >>>> to the>>>> fittings.  BTDT on my 200-20V using one each #190000-5-6S and  >>>> one -6S (the>>>> Audi tubing was a different size on each end) and 25" of AE  >>>> FC300-06RL hose.>>>> Total cost $23.30
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v