Parts needed
Adam Gratz
adamgratz at gmail.com
Sat Nov 3 15:18:19 PDT 2012
Hi all-
I'm looking for a motrinic brain with a 3 barr pressure transducer, or a
stand alone transducer, or an aftermarket fuel management system. Also meed
a 1.9 wastegate sprin.
Anyone?
Thanks,
Doc
91 3b avant- Jungle racer
On Nov 3, 2012 12:00 PM, <200q20v-request at audifans.com> wrote:
> Send 200q20v mailing list submissions to
> 200q20v at audifans.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://www.audifans.com/mailman/listinfo/200q20v
> or, via email, send a message with subject or body 'help' to
> 200q20v-request at audifans.com
>
> You can reach the person managing the list at
> 200q20v-owner at audifans.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of 200q20v digest..."
>
>
> Today's Topics:
>
> 1. Re: CC head diagnostic only shows 12.0 volts (Mike Miller)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 02 Nov 2012 20:51:30 -0600
> From: Mike Miller <mikemilr at blackfoot.net>
> To: 200q20v at audifans.com
> Subject: Re: CC head diagnostic only shows 12.0 volts
> Message-ID: <509486B2.8040209 at blackfoot.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> I had a 200q that read a flat 12.0v on the CC head. It read normal
> battery voltage on the terminal under the hood and at the battery. I
> don't believe the splice is part of the issue.
>
> I drove it at least 50k miles with no problems and I didn't worry about
> it. I agree it is a handy tool to be able to watch how much the voltage
> drops when the fan comes on or you turn on the headlights and high
> beams. But, my other vehicles don't have that handy tool so I never
> wanted to spend time chasing it.
>
> --mike
>
> On 11/2/2012 11:36 AM, Pete Bergin wrote:
> > Rethinking all of this, if it has been much over 120k on your
> regulator/brushes they could be getting a bit week.
> > Pete
> >
> >
> > -----Original Message-----
> > From: PeterBergin <PeterBergin at aol.com>
> > To: ed.kellock <ed.kellock at gmail.com>; 200q20v <200q20v at audifans.com>
> > Sent: Fri, Nov 2, 2012 6:45 am
> > Subject: Re: CC head diagnostic only shows 12.0 volts
> >
> >
> > I suppose you could study the wiring section in the Bentley and see where
> > the feed for the measurement comes from and start taking reading upstream
> > until you find a connection that might be a bit week or get a use AC
> head,
> > plug it in and see if you get a different reading.
> >
> > Don't worry soon something more important on the car will need attention
> > and keep you busy!
> >
> > Pete
> >
> >
> > In a message dated 11/1/2012 10:11:27 P.M. Central Daylight Time,
> > ed.kellock at gmail.com writes:
> >
> > I agree with your point, to a point... I wouldn't be quite as fixated on
> > this if it hadn't just occurrred. And the fact that the reading is
> static
> > at 12.0. I know and have known for some time that the reading won't be
> > accurate and correct, but it has always been relevant, i.e. a useful
> indicator
> > of system status, readily available, without stopping or getting out of
> the
> > car.
> >
> >
> > Ed
> >
> >
> > -----Original Message-----
> > From: PeterBergin at aol.com [mailto:PeterBergin at aol.com]
> > Sent: Thursday, November 01, 2012 7:04 PM
> > To: ed.kellock at gmail.com; 200q20v at audifans.com
> > Subject: Re: CC head diagnostic only shows 12.0 volts
> >
> >
> > My old Avant was always 13.5-13.8 at the jump post and similar at the
> > battery post (eliminate the possibility of a splice problem). The AC
> head
> > channel 11 was always ~11.8-12.5 and fluctuated allot depending on the
> load
> > ware as the dash gauge was more constant. Never changed much over 10
> years
> > and 240k miles. Several brush/reg packs replaced and a re-man Bosch
> alt. I
> > would not worry about it. My old 5000 was the same.
> >
> > Save your worries for the bigger $$ stuff!
> > Pete
> > 91 Avant sold to Drew and brought back to life!
> > 02 S6 Great car same game!
> >
> >
> > In a message dated 11/1/2012 12:07:23 P.M. Central Daylight Time,
> > ed.kellock at gmail.com writes:
> >
> > And I have 13.6 at the jump start post and the dash gauge reflects that
> as
> > well.
> >
> > 91 200q20v Avant with 248k.
> > Threw the alt belt two days ago.
> > I punched up the volt reading on the cc head and it was still over 13
> volts
> > when I got home and shut it down.
> > I installed a new belt yesterday and the IC gauge is fine, but channel
> 11
> > only shows 12.0 and it doesn't change.
> > I googled for an hour last night and couldn't find any info. I know
> I've
> > seen it mentioned in the past at some point.
> > I'm going to dive into the manuals now.
> > Just a quick post in case anyone's got a quick answer.
> >
> > Thanks!
> > Ed
> >
> >
> > _______________________________________________
> > 200q20v mailing list
> http://www.audifans.com/mailman/listinfo/200q20v
> >
> >
> >
> > _______________________________________________
> > 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
> >
> >
> > _______________________________________________
> > 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
> >
>
>
>
>
> ------------------------------
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v
>
>
> End of 200q20v Digest, Vol 108, Issue 3
> ***************************************
>
More information about the 200q20v
mailing list