[A4] Partial High Beam voltage?!

[Richard Andrews]

I ran one relay per light.
>
> I also used a dedicated ground to the chassis. one is off a bolt behind
> the airbox, and one is off a bolt for the p/s reservoir.
> I cleaned the grounds with my dremel but some sandpaper would probably
> work well also.
>
> I will try to snap some pics and send them
>
> -richard
>
>
> On 8/13/07, Tyson Varosyan <tyson at up-times.com > wrote:
> >
> > Guys at this point, some wiring diagrams would do me good. Also, are
> > there
> > any light switch removal instructions anywhere? I hope the steering
> > wheel
> > doesn't have to come off.
> >
> >
> >
> > Tyson Varosyan
> > Technical Manager, Uptime Technical Solutions LLC.
> > tyson at up-times.com
> > www.up-times.com
> > 206-715-TECH (8324)
> > UpTime/OnTime/AnyTime
> >
> >   _____
> >
> > From: Brizax at aol.com [mailto: Brizax at aol.com]
> > Sent: Monday, August 13, 2007 2:42 PM
> > To: tyson at up-times.com; richard.j.andrews at gmail.com; A4 at audifans.com
> > Subject: Re: [A4] Partial High Beam voltage?!
> >
> >
> >
> > check the switch and the relay, search the audiworld forums as well
> >
> >
> >
> >
> >
> >   _____
> >
> > Get a sneak peek of the all-new AOL.com
> > <http://discover.aol.com/memed/aolcom30tour/?ncid=AOLAOF00020000000982>
> > .
> >
> > _______________________________________________
> > A4 mailing list
> > A4 at audifans.com
> > http://www.audifans.com/mailman/listinfo/a4
> >
>
>
>
> --
> Richard J. Andrews
> richard.j.andrews at gmail.com
>




-- 
Richard J. Andrews
richard.j.andrews at gmail.com