[A4] A4 Digest, Vol 43, Issue 6

[Peter Kirby]

There is a breather hose connector (triple outlet) that I think I'll have to
take off to get to it.  As it is, I really can just barely get a finger on
the ECT.

But for now, I have just cleared the error code....

Thanks.

Peter

On 5/25/07, Phil Yee <philter at myway.com> wrote:
>
>  I didn't find any tricks. Unplug the wire, and maybe another nearby
> harness. It's fairly tight and dirty, but not very difficult. The only thing
> that helped me is the old gasket/oring trick of pre-lubing it with a just
> little bit of bar hand soap. Nice thing is that it's arranged so that when
> you swap it, there very little chance of any significant air bubble forming.
>
>
> Message: 1
> Date: Thu, 24 May 2007 19:00:35 -0400
> From: Peter Kirby <4pkirby at gmail.com>
> Subject: [A4] changing engine coolant temperature sensor
> To: "'A4 at audifans.com'"
> Message-ID: <46561913.9080404 at gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Any BTDT?
>
> I am getting a check engine light that my ProDiag claims is a sporadic
> high reading from the engine coolant temperature sensor. I've bought a
> new and was planning to install it but see that there is the usual
> forest of things in the way. Any suggestions of what has to be removed
> and if there are any tricks in getting the old one out.
>
> Patient is a 2001 1.8t.
>
> Thanks.
>
> Peter
>
>
>
> ------------------------------
>
> _______________________________________________
> A4 mailing list
> A4 at audifans.com
> http://www.audifans.com/mailman/listinfo/a4
>
>
> End of A4 Digest, Vol 43, Issue 6
> *********************************
>
>
> ------------------------------
> No banners. No pop-ups. No kidding.
> Make My Way your home on the Web - http://www.myway.com
>
>