[A8] Axles

[Rich, Jack]

I chose Raxles based on the recommendation on, I think, Paul Waterloo's Audi Pages.  They included the necessary tools and the new axle nut.  I think they included other bolts, like the impossible-to-remove one which holds in the upper control arms.  One side was really difficult to get out, the other side I had to take it somewhere to get the bolt out.

I wish I had replaced my upper control arms at the same time, as I had to do them about a year or so later.  At least the impossible-to-remove bolts came out pretty easily so recently after replacement.

Jack

-----Original Message-----
From: a8-bounces at audifans.com [mailto:a8-bounces at audifans.com] On Behalf Of Vincent Gelinas
Sent: Thursday, November 17, 2011 10:29 AM
To: quattro at audifans.com; a8 at audifans.com
Subject: [A8] Axles

Hi, all!

I need to replace the front outer CV joints on my PF D2 A8q and I'm 
wondering what's the best choice to replace those.  I can have good used 
joints put on with new boots, go with a $100/side reman axle, or go with 
Raxles for $199/side.  Any BTDT?

Thanks,

Vincent
_______________________________________________
A8 mailing list
A8 at audifans.com
http://www.audifans.com/mailman/listinfo/a8