[BiturboS4] Couple of Questions

Michael Kuriger michael at isuzu-mods.com
Mon Apr 28 15:31:53 EDT 2003


--
[ Picked text/plain from multipart/alternative ]
reversing causes the layers to seperate, which causes bubbles and blows
the tires out very fast.  I believe only old bias ply tires can be
reversed once worn in.

Mike

Ti Kan wrote:

>John M. Harrison writes:
>
>
>>Ti, would you recommend
>>strictly front to rear for tires not designated with a rotation
>>direction as well?
>>
>>
>
>Audi has always recommended rotating the tires on the same side
>for all its cars, and I go along with that.  It is probably tire-specific,
>but I think even on non-directional tires, the tread blocks tend to
>"take a set" to spin in a preferred direction.  Reversing that may
>actually accelerate wear.
>
>-Ti
>2003 A4 1.8T multitronic
>2001 S4 biturbo 6-sp
>1984 5000S turbo
>1980 4000 2.0 5-sp
>--
>    ///  Ti Kan                Vorsprung durch Technik
>   ///   AMB Laboratories, Sunnyvale, CA. USA
>  ///    ti at amb.org
> //////  http://www.amb.org/ti/
>///
>
>_______________________________________________
>BiturboS4 mailing list
>BiturboS4 at audifans.com
>http://www.audifans.com/mailman/listinfo/biturbos4
>
>
>

--




More information about the Biturbos4 mailing list