[Biturbos4] First of my own wrenching of my '01 S4
dap128
dap128 at hotmail.com
Tue Mar 9 19:37:28 EST 2004
Mine is actually on the inside of that inlet (more towards the engine than
the outside of the car), but it should work the same on either side.
Glad I could help.
-Dave
----- Original Message -----
From: "Single Malt" <s_malt at yahoo.com>
To: "dap128" <dap128 at hotmail.com>; <biturbos4 at audifans.com>
Cc: <s-cars at audifans.com>
Sent: Tuesday, March 09, 2004 7:34 PM
Subject: Re: [Biturbos4] First of my own wrenching of my '01 S4
> That explanation was pretty good! I fitted the clip onto the lower inlet
> towards the outside of the car (there is a little protuberance that holds
the
> clip on the lower section) ... then I replaced the upper portion of that
inlet
> and it slips right onto that clip! Thanks!! That mystery is now solved.
>
> -steve
>
> --- dap128 <dap128 at hotmail.com> wrote:
> > I know where that clip goes, but its kinda difficult to explain. It
goes on
> > the air inlet next to the airbox... look at the bottom center of this
one of
> > your pictures:
> > http://www.inners.com/s4airfilter/images/MVC-012F.JPG
> >
> > Clips on the inside of that inlet to the airbox and holds the plastic
pipe
> > pictured here:
> > http://www.inners.com/s4airfilter/images/MVC-018F.JPG
> > in place.
> >
> > Perhaps someone can explain it more clearly than that :)
> >
> > -Dave Pramanik
> >
> > ----- Original Message -----
> > From: "Single Malt" <s_malt at yahoo.com>
> <snipped for brevity>
> > >
> > > I came across an extra part under the filter. Looks like some kind of
> > > retaining clip. I could not find a place that was obviously missing
> > anything.
> > > Anyone able to identify this? -third picture from the top
> <snipped for brevity>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Search - Find what you're looking for faster
> http://search.yahoo.com
>
More information about the Biturbos4
mailing list