[Biturbos4] Bi Pipe Install Challenges

[Nicholas Mistry]

Just curious, what was the reason for installing the BiPipe?


The Corbs wrote:

> Hi Gang:
>
> Installed the famous BiPipe in my son's '00 S4 this weekend.
>
> Very impressive instruction manual from APR!!
>
> HOWEVER:
>
> When it came to fitting the Bi Pipe to the throttle body, where the 
> instruction talk about gently pushing it into place, I found that I 
> had to sand the inside of the BP with fine emery paper to get it to 
> fit at all (among other things tool marks), and finally had to resort 
> to using the bolts to "pull" it into place.
> Sent APR an e-mail asking if they had had any other issues with their 
> latest production run, or other suggestions/help - ZERO response as 
> yet - I will call them tomorrow.
> Also found that the lower mounting holes did not match up and had to 
> be relieved (which I can understand given the flex in the belt covers 
> that they mount to).
>
> The car was stock prior to this mod.
>
> Any similar experiences/solutions?
>
> Thanks
>
> John Corbs
>
>
> _______________________________________________
> Biturbos4 mailing list
> Biturbos4 at www.audifans.com
> http://www.audifans.com/mailman/listinfo/biturbos4



-- 
--------------------------------------------------
Nicholas Mistry
GameDNA
315 Main Street; Reading, MA 01867
t:617.697.2626  e:nick at gamedna.net