[Biturbos4] Headlight alignment

[Ti Kan]

Wilson Northrup writes:
> I'm not sure it is to be done without the VAG tool.  the xeon lights move 
> as the suspension moves (if you look on the driver side suspension, front 
> and rear, you will see two components that attach to the lower control 
> arm.
> ...

Yes, however the headlights must be mechanically aligned first (by turning
the adjuster screws on the headlight housings) so that the automagic
headlight leveling system works from the center of its range, as well
as adjusted laterally so that the beams are pointed properly.  The
alignment procedure is not any different than with other E-code style
headlights.  A good article about headlight alignment is here:

http://www.danielsternlighting.com/tech/aim/aim.html

-Ti