[Es2] fuel pump
Mark Wetzel
Mark.Wetzel at verizon.net
Tue Aug 10 08:45:00 EDT 2004
So what have we learned about loaning things to friends? I loaned a
small impact driver to a friend too, after a year I was getting angry he
hadn't returned it. Finally I said I wanted it back, and he admitted he
lost it. I asked him to replace it, and he got angry. Go figure?
Don't know what pressure you need. In the 90 I am running about
10bar/140psi, in the Coupe around 7 bar, although I am still coming to
terms with that car for now.
Oh, and the 90 is a 7A/3B, and the Coupe is an AAN.
Squid
-----Original Message-----
From: es2-bounces at audifans.com [mailto:es2-bounces at audifans.com] On
Behalf Of Jack Walker
Sent: Monday, August 09, 2004 4:06 PM
To: es2 at audifans.com
Cc: urq at audifans.com; 3B at audisport.com
Subject: RE: [Es2] fuel pump
Seeing this message, got me to thinking?
What kind of pressure does the original UrQ fuel pump create? How do I
test the current pressure? Is the UrQ pump inside the tank as well? Do I
need to replace to get the pressure necessary for a UrQ with a stock AAN
motor and eventually an RS2ed motor? Haven't even considered fuel lines
for this yet. I have the 93 S4 donor car I'm getting the AAN motor from
with it's stock pump and housing I would guess (Haven't even ventured
under the donor car in the area of the gas tank). Although I have sold
the fuel lines to a casual friend's car that came from Qship, I believe.
His were rusted, by the way what are they worth, haven't gotten paid
yet, great friend when I asked for $75 he got very agitated that I was
charging him too much. I was thinking he should get a set of new ones
and replace mine...
Jack Walker
Portland, Oregon
-----Original Message-----
From: es2-bounces+jwalker=ivey.com at audifans.com
[mailto:es2-bounces+jwalker=ivey.com at audifans.com] On Behalf Of coup
quat
Sent: Monday, August 09, 2004 1:23 PM
To: es2 at audifans.com
Subject: Re: [Es2] fuel pump
I am running 200/s4 pump, you'll need to get the pump housing from 200
or s4 since the 200/s4 pump is smaller in diameter. Curently running
over 400hp, over 60psi fuel pressure setup, had no problem yet (knock on
wood!!).
Ben Klumper <bklumper at mdbworld.com> wrote:Elijah,
I am currently running the stock CQ pump without problem. I'm also below
300 hp and by the sounds of it, you're going to be well above that so
I'm not sure if the CQ pump will work or not.
Ben
> Hi, what have you guys done for fuel pumps in the coupe? The one in
mine
was
> just replaced but I think with a stock coupe pump. Will the pump from
a
> urs4/s6 fit? Or is there something better?? Thanks,
>
> Elijah
_______________________________________________
Es2 mailing list
Es2 at audifans.com
http://www.audifans.com/mailman/listinfo/es2
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
Es2 mailing list
Es2 at audifans.com
http://www.audifans.com/mailman/listinfo/es2
_______________________________________________
Es2 mailing list
Es2 at audifans.com
http://www.audifans.com/mailman/listinfo/es2
More information about the Es2
mailing list