[Es2] ac/alt positions

[Jack Walker]

I lost track of who is bringing a crate into the US in the next few
weeks?
Just saw the post below of a crate leaving in two weeks

I need an intake and exhaust manifold for my AAN installation into a
UrQ.
Would love the RS2, but am willing to use whatever I can get my hands
on...ABY ADU.
Would prefer used, but will need corresponding fuel rails and all parts
necessary for the IM conversion.

Can someone forward me to the proper person who is doing this particular
crate?

Jack Walker

Ivey Imaging
5679 SE International Way
Milwaukie, Oregon
97222
jwalker at ivey.com

www.ivey.com

503)353-6521 direct line
503)807-3807 celluar phone 




-----Original Message-----
From: es2-bounces at audifans.com [mailto:es2-bounces at audifans.com] On
Behalf Of Dave K.
Sent: Friday, March 05, 2004 3:41 PM
To: Ben Klumper; Andy; Es2 at audifans.com
Subject: Re: [Es2] ac/alt positions

I concur but I bought the correct AC line.
I can get you the parts you need but I need to know ASAP.  Crate is
departing Germany in two weeks...

Dave K.
----- Original Message -----
From: "Ben Klumper" <bklumper at mdbworld.com>
To: "Andy" <AndrewS at Columbus.rr.com>; <Es2 at audifans.com>
Sent: Friday, March 05, 2004 6:07 PM
Subject: Re: [Es2] ac/alt positions


> Andrew,
>
> I used the stock S2 location for the A/C and Alt location, which is
the
same
> as the CQ. I believe this is the easiest way to do it, mainly because
there
> is no fabrication of a/c lines involved. I managed to use the CQ high
> pressure line (from dryer back to evapoator) with a little bending to
clear
> the turbo. It's not ideal, as it virtually touches the hot side of the
> turbo. For now I'll see how it holds up.
> This configuration also allows you to use the CQ's compressor and
mounting
> brackets, as well as the alternator mounting bracket. You will have to
> purchase the S2 oil pan extension that is drilled and tapped for the
turbo
> oil return line (although, I think you would need this eitehr way?).
You
> also need the S2 oil filter bracket, or you would have to remotely
locate
> the oil filter and fabricate lines so it does not interfere with the
a/c
> compressor.
>
> HTH,
>
> Ben
> ----- Original Message ----- 
> From: "Andy" <AndrewS at Columbus.rr.com>
> To: <Es2 at audifans.com>
> Sent: Friday, March 05, 2004 3:45 PM
> Subject: [Es2] ac/alt positions
>
>
> > I'm getting close to test fitting the 3B in the car and am wondering
if
> > someone can tell me what configuration they used and what they would
> > recommend.
> > TIA
> >
> > Andrew Suttner
> >
> > '91 Coupe Quattro w/3B close by
> >
> > _______________________________________________
> > Es2 mailing list
> > Es2 at audifans.com
> > http://www.audifans.com/mailman/listinfo/es2
> >
>
>
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2

_______________________________________________
Es2 mailing list
Es2 at audifans.com
http://www.audifans.com/mailman/listinfo/es2