turbo and WOT injector

[Jörgen Karlsson]

> At what RPM does the engine start to lean out at full throttle? - what if
> one takes the after TB location of the temp sensor blank on the
> MC manifold
> and mount an injector there - trigger cold start valve at WOT and
> xxxx rpm -
> trigger additional injector at WOT and xxxx + ? rpm til redline... ?

If you ad a boost switch to the setup I am sure that it will work perfect,
BUT I am not sure about the location of the injector that you described. I
wouldn't try it without doing a few plug cuts in the beginning. As Javad
says, the best way are of course to use a additional injector controller,
www.perfectpower.co.za has the absolutely best one I have seen. If you are
into electronoics I have a schematic of a suiutable circuit that delivers
fuel proportional to rpm.

Jörgen