causes for a non-functioning FV???(4ktq)
Marc Swanson
mswanson at cisunix.unh.edu
Tue Aug 29 20:14:50 EDT 2000
> About all I can add is that you won't be able to measure
> the duty cycle at the FV itself. You have to measure it
> at the ECU end of the resistive wire (ie. at the ECU or
> the test connector) and the FV must be plugged in. I'd check
> the voltage at pin 8 of the ECU with ign on, and during
> the relevant output check.
voltage stays pretty much constant throughout the output test. It SHOULD be
switching to ground though right???
> Try the AC range on the meter as well...
hmm... wish I had a meter that could measure AC... Maybe I should look for
one..
Later
-Marc-
More information about the quattro
mailing list