200q resistor pack removal

[Keith Lawyer]

Well, had some time today to play w/the 200, still
trying to get the after-run cooling system to work. 
Replaced after-run temp sensor (only $11).  I then
found the low speed fan relay was completely missing
(relay postion #6).  Replaced that w/the relay from my
'86 4kq parts car - is this ok?  It plugs right in,
but I don't even have the old relay for reference.  
  Also found fuse #21 was blown, replaced that.  The
relay mentioned above tests fine.  Nonetheless, the
low speed fan still does not run w/ac on, and the
afterrun system does not come on like it should - but
if I jumper across the afterrun sensor the aux pump
only runs.
  So, I guess all that's left is the resistor pack.  I
looked down there today and saw three phillips head
screws that apparently hold it in place.  Is this all
there is?  Any hidden screws under the radiator? 
Finally, a good inexpensive source for resistor pack? 
Can one resistor be replaced separately?

Thanx,
Keith L.
'89 200

__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/