my '88 5kcstq

[Ti Kan]

Ken Keith writes:
> I still only get 1.2 bar most of the time, 1.3 hardly ever and only 
> after extensive winding out of the motor.  With the engine off and 
> key "on", the stock gauge reads 0.9.  Yes, the 1.2 reading is from 
> the stock gauge.  I will get boost and oil temp gauges later.

If you get 0.9 with engine off, then 1.3 sounds about right.  The
stock gauge is not always accurate.  If you're having difficulty
attaining 1.3, then check your full throttle switch to make sure
it's working and correctly adjusted.

-Ti
01 S4 2.7 biturbo quattro
84 5000S 2.1 turbo
80 4000 2.0
96 A4 2.8 quattro (sold but not forgotten)
-- 
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Research Laboratories, Sunnyvale, CA. USA
  ///    ti at amb.org
 //////  http://www.ibiblio.org/tkan/
///