Heebie Jeebies

[isham-research.freeserve.co.uk at pop.pol.net.uk]

> we had a block with steel caps, due to oil surge a
> shell picked up on the crank and rotated in the cap.

> we just milled a mm off the end of the cap and then
> had the whole thing line bored at a local engineering
> works

There aren't any shells in I5 cam bearings - the cam runs in the
machined head.

--
 Phil Payne
 http://www.isham-research.freeserve.co.uk/quattro
 Phone +44 7785 302803   Fax: +44 7785 309674