4kq turbo project- clutch questions

[JShadzi at aol.com]

   Not true, I have seen standard KH 5k in early to mid 85.  It is not really 
an issue, however, I believe the KH and MC both use the same flywheel anyway, 
an 034 105 270 H.  Obviously the auto tranny has no flywheel, the ring gear 
would not physically work even if tried.  Swapping over the appropriate parts 
from a manual turbo is the best way.
Javad

<<That said, KH engines only had A/T's, so the flywheel would need to be 
different. Maybe fitting an MC w/ M/T type flywheel will help. You might even 
be able to put on your old 4k flywheel, but it's prolly smaller and 
the pins may not be present which is necessary for turbo engines. I don't 
know for sure if A/T flywheels are different, but you need to think of all 
possibilities. good luck.>>