FW: experience with delrin

[Peter Berrevoets]

You find a way to do that and I'll order a set!!

Problem with machining would be temperature (maybe?) - perhaps freezing or
using a CO2 extinguisher to keep the bushing material cold might make it
machineable.

JM $.02

Peter
1990 200TQ

> >-----Original Message-----
> >From: quattro-admin at audifans.com
> >[mailto:quattro-admin at audifans.com]On
> >Behalf Of William M. Lockwood-III
> >Sent: Sunday, November 19, 2000 7:29 PM
> >To: quattro at audifans.com
> >Subject: experience with delrin
> >
> >
> >Anyone have any experience with making bushings?  I have
> >access to a lathe
> >and I NEED new front subframe bushings.  Mine are all
> >"blowed" up.  Too
> >much of that sideways driving again.
> >
> >Can I do this i'd love too.
> >
> >Bill
> >88 5ktq much of the fun stuff
> >87 5kq much stuff to do
> >86 5ktq pearl, owned by some cool guy
> >86 5ktq also much stuff to do
> >86 5ktq total, but a good race car body... M5's watch out!
> >these are the new additions!
> >
> >