Intercooler blow-out and by-pass valve

[Peter Berrevoets]

Have just picked up a by-pass valve from the local dealer ($67.52 CDN) and
am about to install it. I was going to strap the intercooler at the same
time but was wondering if this was necessary with the by-pass valve in
place?

Currently running a shimmed waste-gate and getting 1.6 BAR max indicated on
dash gauge but do have fuel relay cut-out irritating me on an infrequent
basis. That is to say I know not to hold WOT any longer than around 3
seconds or the relay kicks out. This is really annoying only some of the
time but I will fix it too.

TIA!

Peter Berrevoets
1990 200TQ
Toronto, Canada