200 TQW wipers

[scott miller]

Dave:  I bought mine that way, pulled the whole arm assembly out trying to 
analyze.  The last thing I pulled apart was the single splined shaft that 
drives the rod, that drives the two splined shafts the wiper arms are 
mounted on.  It was loose, all I needed to do was tighten that in the right 
position.  Wish my back wiper motor were so simple, PO put in the wrong 
motor/driver.  Good luck,

Scott Miller (occasional lister)
Holland, Michigan
'90 200tqw
===========================================================
I am wondering if anyone knows how to reset the stop point
for the wipers on my 1990 200 TQ wagon. In the rain and snow
over the past few days, the wiper stop point has changed from
its normal park position, to gradually moving across the windshield.
At this point the wiper is parked at about a 60 degree angle,
conveniently right in the drivers line of vision. I have played with
the interrmitent and on positions and turned the car off to try and
get it to reset, but no luck.

Any BTDT on getting the wipers back to the normal park position
would be greatly appreciated.
-
Dave Lawson
1990 200 TQW
1983 urq



_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at 
http://profiles.msn.com.