Wheel bearings and getting bent over

[Cobram .]

Orin Eman <orin at WOLFENET.com> writes:

>>Depends on how badly the bearing inner race sticks on the hub.
There isn't room to get a decent puller in there.
Even so 2 hours seems excessive.<<

The strut was out, taken to someone who had a press.  No way any part of the
bearing is going to be left sticking to the hub at those pressures.  A set
of bearings done on the car would probably justify the two hours, maybe even
a little more if they are really stuck, but that wasn't the case, the lister
handed them the struts.

BCNU,