Help! Afterrun Fan no longer running

[David Head]

Oooo - that's a toughie - the pn is on the side - all I remember is white
insulator, red dot.

Adam Jansen wrote:

> That would be it David.
> Jumpered them together and the fan ran fine.
>
> What sensor do i need to ask for?
>
> adam
>
> Its controlled by the 2 pin sensor where the upper hose goes to the head.
> Check
> those connections. With the engine off, jumper those 2 wires - do not ground
> them. If the fan/pump runs, its the sensor
>
> Adam Jansen wrote:
>