Radiator fan resistor unit

[Craig D. Niederst]

Ryan,
Noticed the same on my '92 100S. Checked Bentley and the one post with no
wires appears to be correct.

Craig
'92 100S (90k)
'86 CGT (192k)

----- Original Message -----
From: "Ryan Hoitink" <rahoitink at students.wisc.edu>
To: "Quattro list" <quattro at audifans.com>
Sent: Tuesday, October 17, 2000 11:35 PM
Subject: Radiator fan resistor unit


> While replacing the lower engine cover this weekend, I noticed that the
> resistor pack for the radiator fan residing in the driver's fender.  I
found
> it odd that several wires were connected to one contact, one was connected
> to another contact, and no wires were connected to another contact.  My
> question is, are all the resistors supposed to have wires going to them,
or
> is there just an extra?  This pack seems to be pretty universal among
> 5000/100/v8 models, so there's a possibility that one's unused, but it
just
> seemed odd to me.  Subject car is '92 100cs.
>
> -Ryan
>