WTB: 4k light switch

[Megasus at aol.com]

In a message dated 10/26/00 9:37:39 AM Eastern Daylight Time, 
knotnook at traverse.com writes:

> The loom 
>  connector and the switch housing usually become "welded" together into an 
>  inseparable mass of melted plastic by the overheating.


Luckily mine are separated. I have been using an old light switch fooler. By 
this I mean it is an old light switch with a piece of wire soldered across 
the 4 contact points and a few drops os solder connecting the metal plates at 
the end of the switch. This fools the headlights and tailights into thinking 
they are switched on. I have to unplus this contraption everytime I want my 
lights off. So I assume all I will need is the switch at this point.

-m