200tq won't run

[Otto Myyra]

On Sun, Oct 29, 2000 at 10:46:19PM -0500, Brett Dikeman wrote:
> At 7:30 PM -0700 10/29/00, James Marriott wrote:
> >  > I'm having a bit of a problem with my 200tq.
> >
> >The super-rich mixture from the cold-start valve is probably
> >masking a vacuum leak. Check all 9305 connections for a
> >loose/missing one.
> 
> Unless it's a 1990 200 20vt (he's not in the US), in which there is 
> no such valve.
> More information is needed...the model year, or the engine code(3B, 
> MC, MB, MC-II, etc.)

 It is a 1986 10v 200 tq, engine kode KG, non-US car with K-jetronic.
 (sorry that I didn't tell this earlier, I was a bit tired when
  I wrote the original post)

> Has a code dump from the ECU been performed to check for 
> malfunctioning sensors? An output sequence test to make sure all 
> valves are working properly?

 My 'check engine' light does not work at the time so the code dump
 is hard to do. Maybe I'll have to fix the meter panel first...

 -Otto-

-- 
   _______________________________________________________________
  / Otto Myyrä                                                   /
 / Otto.Myyra at lut.fi / qwerty at lut.fi / qwerty at iki.fi            /
/ <A HREF="http://www.lut.fi/~qwerty/">My homepage</A>         /