Removing Blind Clip on T44 driver's door window?

[Buchholz, Steven]

Thanks to all for the quick replies!

I did the deed last night.  First I confirmed that indeed removing the inner
door panel would allow easy access of the clip.  I figured that it might be
quicker if I left the door intact so I tried that first.  This door had an
"E" clip holding the regulator pin to the bottom of the window ... the last
one I did had a "C" clip.  It was fairly easy to remove the clip with a bent
pick ... I had positioned the bottom edge of the window to be a couple
inches above the indentation in the outer door panel for the rub strip/crash
bar on the outside, which maximized the room between the clip and the sheet
metal.  A small mirror was useful to assess the orientation of the clip.  

HTH!
Steve Buchholz
San Jose, CA (USA)