Audi Ur-Q vs. Mustang 308

[TM]

True.

I'd get the aluminum block 351 from the Motorsports catalog and build
that one up. The 640ci block sounds pretty wild. Can you fit something
that big into a Mustang w/o making it a tube-frame monstrosity?

The 302 w/ heads and a blower was pretty all bolt-on, that's why I
mentioned it. 302 engines are pretty cheap, after all.

Taka

-----Original Message-----
From: bmxman 69 [mailto:bmxman_69 at hotmail.com]
Sent: Monday, September 04, 2000 10:51 PM
To: t44tq at bellatlantic.net; quattro at audifans.com
Subject: RE: Audi Ur-Q vs. Mustang 308


Guys, why bother with the 302 anyways?

It's a little motor when you consider the abundant amount of larger ford
small blocks available.  If I wanted to stay little I'd put a 351 Windsor in
with a blower on top.  If i didn't want a supercharger, I'd say to hell with
ford and bore out a 400 c.i.d. small block chevy to 427.

If I was really going drag racing, I wouldn't bother with a small block
anything.  I'd pick up a 640cid aluminum donovan.  Strap a big blower on
top, give it carillo rods and whatever else i could blow 50 grand on.

There's no real substitute for cubic inches.

Later