200 trim removal

[Ryan Gemmill]

I believe it is on there using only glue. If my recollection serves me
correctly, a friend removed all the words/ring on the trunk of his 200, and
there were no pegs, only glue on everything.

HTH!

Ryan Gemmill
91 200, 1.8 bar
----- Original Message -----
From: <JanDebL at aol.com>
To: <quattro at audifans.com>
Sent: Sunday, September 10, 2000 9:43 PM
Subject: 200 trim removal


> Any BTDTs on removing the 4 ring emblem on the trunk of a 200?  I can't
see
> any thing from the inside of the trunk.  I pulled one of the license plate
> lites out but my mirror is to large to get in and see anything.
> Does the emblem use the standard audi / vw plastic pegs with a matching
> female insert in the trunk?
> I'm removing it to paint the trunk so if I need to pry it off with a putty
> knife, its not a big deal.
> TIA, Jan Lahtonen
> _______________________________________________
> Quattro mailing list Quattro at audifans.com
> To remove yourself, change to digest mode, or temporarily stop delivery
> please visit the web interface at
> http://www.audifans.com/mailman/listinfo/quattro
>