Recomend a Fuel Pressure Gauge?

[Ameer Antar]

Yes that part is for Bosch, but Mercedes are the only car that NEED this 
part. I know what you mean about tight space though. What I did was pass 
the fuel hose behind the fender. There is a hole opposite the center of the 
distributer. From behind the fender I passed the hose through the hole and 
into the distributer. Make sure you leave the fittings 1-2 turns loose so 
you can spin the fitting into the distributer. The hose can spin at the 
fitting, but only when it's loose. To tighten it down properly, I had to 
remove the adjacent fuel injector unions on top. Hope this helps. Trust me, 
you don't need that long fitting for Audi's. good luck.



At 08:47 AM 9/13/00 +0000, you wrote:

> >> > JC Whitney has a kit for $55 which works ok. The fittings had to be
>
> > isn't that for Mercedes CIS only? I didn't use it on my Audi 5kT...
>
>No, it's generic to Bosch CIS.  The only problem with the 5k is that
>the metering head is very close to the fender and it's a little
>difficult to attach.
>
>--
>  Phil Payne
>  UK Audi quattro Owners Club
>  Phone +44 7785 302803   Fax: +44 7785 309674