delrin control arm bushing BTDT?

[Kaklikian, Gary]

Marc,

I recently installed the Blau bushings front and rear on my 4000Q. The
improvement in handling and ride over the eurethane bushings was remarkable.
Plus, they are quiet while the eurethane ones were creaky all the time. The
eurethane bushings were ok for the first few thousand miles. Hopefully, the
delrin ones will last a while; Blau says they have a lifetime warranty.  

Gary Kaklikian
86 4ktq
92 S4

-----Original Message-----
From: Marc Swanson [mailto:marcswanson at mediaone.net]
Sent: Monday, September 18, 2000 10:13 AM
To: quattro at audifans.com
Subject: delrin control arm bushing BTDT?


I'm in the process of replacing/upgrading all the rubber bits on my
front/rear subframe/control arm assemblies and I was looking up pricing on
Delrin control arm bushings from the two sources I know carry them: Blau and
2Bennett.  Blau sells a set of 4 (enough for front or rear but not both) for
$90 while 2Bennett sells their set of 4 for $200...  Are there differences
between the 2 sets (other than price of course)?  In talking with 2Bennett
they said they haven't seen Blau's kit but they think there's is probably
higher quality....  Can anyone put any comments in on this that have
seen/tried both?

Thanks


-Marc-



/* +++++++++++++++++++++++++++++++++++++
+Marc Swanson                          +
+                                      +
+http://marcswanson.ne.mediaone.net    +
+                                      +
+87 4kcstq                             +
+85 4ksq  "the spare"                  +
+87 5ktq   donor (Parting out)         +
+++++++++++++++++++++++++++++++++++++ */

_______________________________________________
Quattro mailing list 	Quattro at audifans.com
To remove yourself, change to digest mode, or temporarily stop delivery
please visit the web interface at
http://www.audifans.com/mailman/listinfo/quattro