difference between turbo and non-turbo 5-spds?

[Buchholz, Steven]

> great working solution please let me know. with the speedo, I believe that
it 
> a different setup from the NA to turbo (NA isnt electronic i think?) but I

> cant recall which parts you need.

... I've never looked at the two right next to each other, but I'm pretty
sure that you can use electronic/cable speedo interfaces interchangeably at
the tranny's port.  If the car being converted has an electronic speedo you
transfer the sender from the auto box to the MT and hook up the wires ... if
the car has a cable it gets inserted in place of the sending unit ... 

... this is all based on my BTDT on urq, 4000 and 5000 models.  I hear that
there was a newer setup which used a hall sender that plugged into the
tranny ... I believe this started in the later 200 models (hmmm ... perhaps
I should see how the V8 is set up here) or perhaps the S4.  I would imagine
that it would be necessary to do a speedo conversion if one wanted to swap
in a tranny from one of these newer cars ...

HTH!
Steve Buchholz
San Jose, CA (USA)