200 Flywheel being used (was It's official, a 2.3 4000 q..)

Huw Powell audi at mediaone.net
Wed Apr 11 17:44:52 EDT 2001


Dwight & Tina Varnes wrote:
> 
> If you are using the CISE-III ignition, then you'll need them.

CISE-3 does not use senders at the flywheel, at least not the examples I
have seen.

> >
> > Since I already shelled out for the ridiculous, I'm wondering why do I need
> > to lop off the crank trigger thingies and balance.  Can't I just leave them?
> > Isn't one or more of these used on the 87.5 CISE3 system I will be
> > installing when I do the swap?
> >
> > I'll take a second look, but I thought the pin thingies were on the flywheel
> > I obtained with the 2.3l NG engine, and were in bacically the same
> > locations.
> >
> > Hope I don't need to do any machine work, as that is what I was trying to
> > avoid in the first place.
> >
> > Ben
> > '85 4kq - 2.3NG being prepped to install and using 200 flywheel and clutch -
> > someday: http://www.homestead.com/Ben_Swann/files/GTQswap.txt

-- 
Huw Powell

http://www.humanspeakers.com/audi/

http://www.humanthoughts.org/



More information about the quattro mailing list