JT to Turbo Question

[JShadzi at aol.com]

Yes, this is entirely possible, my BTDT has shown that the CIS systems will be good to about 8lbs boost before things start getting on the lean side.  You may have to retard the timing a little and will need to run 92+ octane to prevent detonation.
Javad

In a message dated Thu, 19 Apr 2001 12:17:03 PM Eastern Daylight Time, "Erik R" <eringelberg at hotmail.com> writes:

<< All,

This may sound like a silly question but I have to ask. If I just bolted on 
the early 5k turbo parts to a 4kJT, without changing the ecu...and just run 
it at 6lbs of boost...would the CIS metering work properly?

I was wondering why under low boost that the metering plate would not just 
be sucked open proportionally (and thus with the right A/F ratio) by the 
turbo?

Thanks,

Erik
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

 >>