KH motor IC (was Samco hose pic)

[Ameer Antar]

you're right, the temp sensor is in the intake manifold on the KH motors,
not the intercooler.

-ameer

----- Original Message -----

> Date: Mon, 10 Dec 2001 22:54:14 -0500
> From: Konstantine Bogach <kbogach at home.com>
> Reply-To: kbogach at home.com
> To: JShadzi at aol.com
> CC: quattro at audifans.com
> Subject: Re: KH motor IC (was Samco hose pic)
>
> I saw such intercooler on local junk yard (I don't know exactly what motor
was though) but I noticed that it missing a port for inlet air temperature
sensor. At least it was
> not present in the place where MC motor type ICs have it. Can you comment
on it?
>
> Thank you.
> Konstantin Bogach
>
> >
> >
> >
> > From: JShadzi at aol.com
>
> > Ken, the 20v uses a 5mm bigger TB, so it would be a very tight fit.   I
think 2B might have something they had Samco make on the shelf, however,
that will do what you need.
> >
> > Also, finding a KH intercooler is an easy solution, it has a 1" port
located on the endtank ready to go.
> >
> > Javad
> > 80tq.com
> >
>
>