Best way to pass new wiring to the cabin???

[passat TS]

These nipples look like the ticket for me.

Thanks everyone for the help.

Carlos.


>From: Huw Powell <audi at mediaone.net>
>Reply-To: one at humanspeakers.com
>To: quattro at audifans.com
>Subject: Re: Best way to pass new wiring to the cabin???
>Date: Fri, 21 Dec 2001 17:43:29 -0500
>
>That is an inconvenient location for this particular wire, though.
>
>I didn't chime in earlier, but there is usually a grommet near the brake
>master area with four or five "nipples" that often are not used.
>Cutting a tip off the nipple creates a convenient, usefully located pass
>through for new wires.
>
> > If you have A/C then you can pass a wire up the drain spout in the
> > big rubber grommet in front of the evaporator core.
> >
> > >I'm going to put a oil pressure gauge and a pair of driving lamps on m=
y
>87
> > >CGT.
> > >
> > >What will be the best way to pass the gauge wire and the lamp harness
>to the
> > >cabin?
>
>--
>Huw Powell
>
>http://www.humanspeakers.com/audi/
>
>http://www.humanthoughts.org/




_________________________________________________________________
Join the world=92s largest e-mail service with MSN Hotmail.
http://www.hotmail.com