Idle Switch Question

[Phil Payne]

> No matter how I adjust the idle switch, I get 3.5 ohms between
terminals 1
> and 2 with the throttle fully closed.  The Bentley calls for zero
ohms.

Scott Mockry has postulated that 4 ohms is the absolute upper limit
for the entire circuit ECU-switch-ECU for the WoT switch.  My own
experiments support
this.  I wouldn't be surprised to find the same applied for the idle
switch.  ISV current measurement with the connector pins shorted out
compared with the current from a closed switch would show you.

> What am I missing here?

A new switch.

--
  Phil Payne
  http://www.isham-research.com/quattro
  +44 7785 302 803
  +49 173 6242039