UK Friends-16valve Audi 80 ? (Turbo 80)

[Ti Kan]

Alexander van Gerbig writes:
>     The ND Golf II kit exhaust manifold will bolt right up to the 3A head.
> The 8V Turbo kit, which is designed for the transverse VW's was bolted to a
> 3A engine in a '77 Audi Fox.  It is very possible to fit either kit, with
> the longitudinal mounting there is also more room to work with compared the
> ...

I know the ND turbo manifold will physically bolt on to the 3A engine,
but the turbo will be sticking straight out the side.  Will there be enough
room to run a downpipe from the turbo back to the cat without some strange
and extreme bends?

-Ti
01 S4 2.7 biturbo quattro
84 5000S 2.1 turbo
80 4000 2.0
96 A4 2.8 quattro (sold but not forgotten)
-- 
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Research Laboratories, Sunnyvale, CA. USA
  ///    ti at amb.org
 //////  http://www.ibiblio.org/tkan/
///