location of serial number on 5ktq engine

[isham-research.freeserve.co.uk at pop.pol.net.uk]

>> With a long enough breaker bar, no problem.
>> Otherwise it tends to jump
>> and you can never be sure you've seen every tooth.

> put a dot of tipex on each one as it goes past?

Well, if you're messing with I5s at this level you really should have a
torque wrench _and_ breaker bar in the 4/5 foot long area.  With the
plugs out, you can turn the engine pretty smoothly.  Tippex (Liquid
Paper - whatever) belongs on the '0' timing mark and nowhere else.

Anyone who installs a flywheel on an I5 without painting the '0' mark
with Tippex beforehand deserves to have their 2084 ceremonially welded
in place.

--
 Phil Payne
 http://www.isham-research.freeserve.co.uk/quattro
 Phone +44 7785 302803   Fax: +44 7785 309674