Hard brake line replacement

[GEORGE MILLS]

You may want to try the dealer for this. Local one here charges about
a buck+ per steel foot including fittings. You'll need to
buy/borrow/steal/or already have a bender. Try not to totally deform
the old line when removing so you'll have a template. If it looks like
the line is going to turn with the fitting on removal, just cut it
off. Then deal with the fittings. You could probably go with copper
lines in the rear if you like to fiddle with things, use old fittings
if they are not too F'dU, etc.

Geo