Tranmission swap in a 87.5 CGT

[Alan Kramer]

>I believe I will need a 2.3 flywheel since that's the motor I have. Is that 
>correct? Does having the flywheel lighten benefit me any?

If you already have a 2.3 engine then you already have a 2.3 flywheel bolted 
to it.

>
>Are the 87.5 CGT half shafts retained, or do they have to be swapped out 
>for other ones?

Depends.  If you swap the tranny flanges from the 87.5 tranny to the 85 then 
yes they are retained.  If not then no.  The inner CV joints on the 87.5 are 
10mm larger in diameter than the '85.  That's the difference.

>
>If I need a 2.3 flywheel, does anyone out there have one for sale?
>

You won't need it.  If you're near Maryland, I have a good 1987.5 tranny 
already pulled if you want it.  Pick up only though.

While you're in there I highly recommend putting in a new clutch, T/O 
bearing and slave cylinder.

Alan
http://www.geocities.com/audikramer

'83 CGT
'85 CGT
'86 4kcsq

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com