Watch this hose

[David Head]

Audi actually makes a retrofit molded hose for this connection - a regular
piece of hose works just as well as their 27.00 3" part. Remove the
swage/compression fitting and you're set. Done it in a parking lot...

"Doyt W. Echelberger" wrote:

> Same hose split on my 87 5ktq recently, but I noticed the antifreeze smell
> and patched it up temporarily with instant glue and some cloth and a small
> hose clamp. The patch saved the head and got me home. Nasty spot to get at
> with any kind of tool or clamp. You don't want this to happen to your car
> unexpectedly.
>
> MC owners are well advised, as Phil suggests, to replace this hose with
> either a new fitting or take the fitting off and cobble a replacement hose
> somehow, before yours fails. The hose is swaged to the fitting at one end,
> so it will require some adaptation. They are getting to the end of their
> natural life.
>
> Doyt Echelberger
>
>  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> At 10:58 AM 7/17/2001 +0100, you wrote:
> MC engine - small and short rubber hose from the cylinder head water entry
> to the pipe passing round the front of the engine to the turbo.
>
> Mine blew at 145mph and cost me the head.  DM1900 for parts, DM800 for
> labour, plus 16% tax.
>
> --
>   Phil Payne
>   http://www.isham-research.freeserve.co.uk
>   +44 7785 302803