1.8T motor into an Ur-Q?

[Rob Andrews]

More info on this subject...someone else seems to believe the following...
RS2 trans. are supposed to bolt to 1.8s. So if the RS2 fits the URQ .The 1.8
will fit the URQ tran.
 So does an RS2 really bolt to a 1.8 and does an RS2 really fit in an URQ

> -----Original Message-----
> From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com]On
> Behalf Of Per Lindgren
> Sent: Sunday, July 22, 2001 6:05 AM
> To: quattro at audifans.com
> Subject: Re: 1.8T motor into an Ur-Q?
>
>
>
>
> Huw Powell wrote:
>
> > 5. isn't that a 225 hp stock engine?
>
> The 1.8T is available in 150, 170, 180, 210 and 225 hp
> ratings from the
> VW/Audi/Seat factories.
>
> >
> >
> > I'm sure the eager and enthusiastic could make an adapter
> plate for the
> > tranny... or, is there a six speed Q tranny that will fit it?
>
> There is at least a 5-speed 4-cylinder tranny that will fit. The 85-87
> Euro-spec Audi 80 GTE quattro had a 4-cylinder engine and
> quattro tranny.
> Since this is a T81/85 car, the tranny should be plug and play.
>
> Or what about the T89, didnt that one come as a 4-cylinder
> quattro in the
> US as well?
>
> PerL
> 92 Cabrio 2.3E
>