No spark for hot start - '90 200tqw

[Konstantin Bogach]

Scott,

I can not tell you from memory. Trace the wire from black connector to the sensor.  Yes, 5Ktq has it in same spot, according to ETKA.

Konstantin

> Message: 2
> From: "scott miller" <macatawa at hotmail.com>
> To: quattro at audifans.com
> Subject: No spark for hot start - '90 200tqw
> Date: Thu, 26 Jul 2001 15:39:25
>
> The ignition timing sensor sounds like a likely culprit.  I'm getting proper
> 1000ohm cold, will test again hot.  Found slight corrosion in top connector
> of coil, cleaned everything.  There appear to be two similar sensors
> together where the ignition timing sensor should be.  I'm guessing it's the
> smaller, upper one, from a sketch in my Bentley, right?
>
> Would an '87ish 5ktq donor have the same part?
>
> Scott
> '90 200tqw
> Holland, MI