quattro digest, Vol 1 #1663 - 20 msgs
TheRingmeister at aol.com
TheRingmeister at aol.com
Sun Jun 17 01:37:49 EDT 2001
Pedro, if you're changing the bumper on the cq, the audi 90 bumper from 92-95
is the same as what you have already. The bumper from the pre-91 80/90
sedans will not meet up with the flares on your fenders, since the sedan of
that vintage didn't have flares.
If you're serious about fitting turbo plumbing/hardware in the 90 B3 cq
engine bay, then most who've come before you have chosen the S2 nose at the
very least, others have gone full bore and opted for an RS2 front end, with
or without the B4 hood upgrade.
check out 20v.org for more details.
good luck,
Wylie Bean
TheRingmeister at aol.com
Audi Brand Specialist
Flow Motors, Inc
Winston-Salem, NC
'90 coupe' quattro
'99.5 A4 Avant Sport 1.8TqTiptronic
In a message dated 6/16/01 5:13:31 PM Eastern Daylight Time,
quattro-request at audifans.com writes:
<< Subject: Fitting turbo intercooler in 1991 Coupe 20V turbo conversion
Date: Sat, 16 Jun 2001 16:46:06 -0700
Does anyone know if the Audi 80/90 front bumper will fit the Coupe model?
The reason for my question is that I need space for an intercooler and I
believe that in the lower part of the front 80/90 bumper I should be able to
fit in the intercooler.
The alternative would be to spend on an S2 or RS2 front bumper, which is
exactly what I would like to avoid.
Any other ideas/suggestions are welcome.
Thanks,
Pedro
91 CQ
91 200
>>
More information about the quattro
mailing list