q: front bumper from '87 5k will work on a '91 200tq? addendum

[Kneale Brownson]

Tow hook is on the other side, of course, and the '87 does not have the 
lower air scoops for (is it?) brake cooling air flow.

At 02:13 PM 06/21/2001 -0400, Kneale Brownson wrote:

>I just went out and looked at both, and it sure looks like the '87 bumper 
>cover would fit on a '91.  My '87 is a TQ.
>
>
>
>At 11:20 AM 06/21/2001 -0600, Barton Oleksy wrote:
>
>>I have a slightly-damaged front bumper (the black part) on my '91 200tq
>>- the right corner has buckled a bit, and the clips holding it onto the
>>car were also damaged so the previous owner put in two bolts to hold the
>>bumper on.
>>
>>I have a line on a local '87 5000 (not sure yet if it's an S or a Turbo
>>- haven't seen it yet) for pretty cheap, like $400 CAD, and was
>>wondering if its bumper would fit on the 200tq.  I understand that the
>>5000, 100, and 200 series are similar (Type 44, right?) but I haven't
>>seen a site yet that gives definitive information on which parts are
>>interchangeable between them and which aren't.  Thanks!
>>
>>Bart
>>'86 CGT
>>'89 200t
>>'91 200tq
>>
>
>
>