replacing stock oil cooler lines (was RE: Metric to AN Adapters?)

[Beatty, Robert]

Since we are all on the subject...

Is there a correct fitting size for the 2 oil cooler lines?  If someone can
tell me what that is, I am going to try and find a truck or hydralic shop to
build some lines and if enough people want to, im sure we can entice them
with a group purchase.  

I would need to know fitting size on the end of the lines and ID of the
hose.

Rob



-----Original Message-----
From: Todd Phenneger [mailto:tquattroguy at yahoo.com]
Sent: Friday, June 29, 2001 5:29 AM
To: Peter Golledge
Cc: quattro at audifans.com
Subject: Re: Metric to AN Adapters?

hat I was asking about was simply replacing the OEM Turbo Oil
lines (NO COOLER, JUST THE FEED AND RETURN LINES) and replacing
them with AN hose and fittings.  But the fitting going into the
KKK Turbo is not a screw type.  So you would have to braze an AN
fitting on there I guess.
l8r
  Todd
 
>